The ROBOTIS Turtlebot3 series is the official ROS (Robot Operating System) Development Platform with a wide range of possible applications for a low price. In addition to that the Turtlebot3 series has a huge community of RnD Departments.
TurtleBot3 is a small, affordable, programmable, ROS-based mobile robot for use in education, research, hobby, and product prototyping. The goal of TurtleBot3 is to dramatically reduce the size of the platform and lower the price without having to sacrifice its functionality and quality, while at the same time offering expandability. The TurtleBot3 can be customized into various ways depending on how you reconstruct the mechanical parts and use optional parts such as the computer and sensor. In addition, TurtleBot3 is evolved with cost-effective and small-sized SBC that is suitable for robust embedded system, 360 degree distance sensor and 3D printing technology.
The TurtleBot3’s core technology is SLAM, Navigation and Manipulation, making it suitable for home service robots. The TurtleBot can run SLAM(simultaneous localization and mapping) algorithms to build a map and can drive around your room. Also, it can be controlled remotely from a laptop, joypad or Android-based smart phone. The TurtleBot can also follow a person’s legs as they walk in a room.
| Items | Burger |
|---|---|
| Maximum translational velocity | 0.22 m/s |
| Maximum rotational velocity | 2.84 rad/s (162.72 deg/s) |
| Maximum payload | 15kg |
| Size (L x W x H) | 138mm x 178mm x 192mm |
| Weight (+ SBC + Battery + Sensors) | 1kg |
| Threshold of climbing | 10 mm or lower |
| Expected operating time | 2h 30m |
| Expected charging time | 2h 30m |
| SBC (Single Board Computers) | Raspberry Pi |
| MCU | 32-bit ARM Cortex®-M7 with FPU (216 MHz, 462 DMIPS) |
| Remote Controller | - |
| Actuator | XL430-W250 |
| LDS(Laser Distance Sensor) | 360 Laser Distance Sensor LDS-01 or LDS-02 |
| Camera | - |
| IMU | Gyroscope 3 Axis Accelerometer 3 Axis |
| Power connectors | 3.3V / 800mA 5V / 4A 12V / 1A |
| Expansion pins | GPIO 18 pins Arduino 32 pin |
| Peripheral | UART x3, CAN x1, SPI x1, I2C x1, ADC x5, 5pin OLLO x4 |
| DYNAMIXEL ports | RS485 x 3, TTL x 3 |
| Audio | Several programmable beep sequences |
| Programmable LEDs | User LED x 4 |
| Status LEDs | Board status LED x 1 Arduino LED x 1 Power LED x 1 |
| Buttons and Switches | Push buttons x 2, Reset button x 1, Dip switch x 2 |
| Battery | Lithium polymer 11.1V 1800mAh / 19.98Wh 5C |
| PC connection | USB |
| Firmware upgrade | via USB / via JTAG |
| Power adapter (SMPS) | Input : 100-240V, AC 50/60Hz, 1.5A @max Output : 12V DC, 5A |
